SilencerCo’s 1/2"-28 Rifle Thread Spacer corrects the problem of a .22 rimfire barrel with muzzle threads that are too long. .22 caliber rimfire and centerfire sound suppressors have the same thread pitch 1/2"-28, but the threaded portion of the muzzle is longer on centerfire rifles. Manufacturers goof up more often than you’d expect and give rimfire muzzles centerfire-length threads.
If a rimfire muzzle has an over-long threaded area, you run the risk of damaging your suppressor by tightening it too far onto the barrel. At the least, the suppressor might not be positioned correctly for optimum operation. The SilencerCo 1/2"-28 Rifle Thread Spacer is the solution. It covers the excess threads, while properly positioning your rimfire suppressor on the muzzle.
SilencerCo’s 1/2"x28 Rifle Thread Spacer fills the gap that would otherwise be left between the silencer and thread shoulder. Check your rifle today!
These interchangeable, modular thread adapters, are available in a variety of different thread pitches to allow the Harvester Big Bore to be mounted on virtually any barrel. Sold individually.
Got a suppressor or other muzzle device you want to use on two different guns, but the barrels aren’t the same size? Not a problem! With the GrovTec Thread Protector Converter, you can take a suppressor made for larger barrels, and mount it on a smaller on. Easy to install, just screw the converter onto a 1/2"-28 muzzle, and then attach any device that fits a 5/8"-24 threaded barrel. Quick and no hassles!
GrovTec’s Thread Protector Converter is the perfect solution for getting the full fun factor out of your guns. Works with a variety of muzzle devices including: suppressors, muzzle brakes, flash hiders, and many others.
GEMTECH is the first manufacturer to develop and sell the Smith & Wesson M&P22 Compact adapter. The adapter is threaded 3/8-24 to 1/2-28 and includes a thread protector and the wrench to remove the existing barrel nut.
Blackhawk’s Rimfire Suppressor Adapter enables you to install a Blackhawk Pulse Suppressor on your .22 LR pistol by adapting the manufacturer’s thread pitch to ½"-28, the most common thread pitch for small-caliber muzzle devices. The female end of the Blackhawk Rimfire Suppressor Adapter has O-ring seal to keep the muzzle threads clean and your suppressor from working loose during long shooting sessions.
Available for a variety of .22 LR pistols, the Blackhawk Rimfire Suppressor Adapter a simple solution that ensures a correct fit between your gun and your suppressor.
Here’s an easy and effective way to attach your Ti-RANT 45 series suppressor to a 300 AAC BLK host! The AAC Ti-Rant 5/8"-24 Adapter allows all Ti-RANT 45 variants to be directly threaded to a 5/8"-24 barrel for use with subsonic 300 AAC Blackout ammunition ONLY.
The AAC Ti-Rant 5/8"-24 Adapter replaces the Ti-RANT’s piston and driving spring, allowing it to be used on a fixed barrel. Innovative wave spring design prevents loosening during fire.
With the AAC Ti-Rant 5/8'-24 Adapter, you can easily move your Ti-RANT suppressor to a different rifle, no need for an additional, heavy rifle suppressor!
SilencerCo’s O-Ring Pack for their rimfire suppressors contains replacement O-rings for a Sparrow, Warlock II, or Spectre II silencer to keep it running at its maximum sound suppression capability. The O-rings are a critical part because they contain blast and debris to keep your suppressor operating quietly and cleanly - the way it’s suppposed to.
With this handy SilencerCo Sparrow / Warlock / Spectre replacement O-ring pack in your range bag, you can rest assured you’ll be able to keep your .22 LR suppressor running a peak efficiency.
The Blackhawk Fixed Mount Pistol Suppressor replaces the piston, spring, and retainer at the base of your suppressor, giving you a direct thread mount for fixed-barrel firearms. With a Blackhawk Fixed Mount Pistol Suppressor you can attach a Smoke Stack™ or Mini Boss™ suppressor on to a fixed-barrel firearm.
Machined from strong, corrosion-resistant stainless steel, the Blackhawk Fixed Mount Pistol Suppressor has a durable matte black finish that blends well with most factory black barrel finishes.