Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.
Really "shines" when other sights are useless. No switch to turn on, no batteries to wear out. Both front and rear blades have their own green tritium gas light source and provide a green/green , 3-dot sight picture. Some models also available in green/yellow and green/orange. The front sight is always green for contrast with the rear sight. Unaffected by weather, gun solvents or oils. Used by NATO, U.S., and Israeli armies. Also ideal for law enforcement and others requiring accuracy in low-light conditions. Contains both front and rear sights. Rear sights either replace the original rear entirely or, as on S&W revolvers, a new rear leaf, screw and nut are provided. Front sights either replace the original (1911 Auto); slip over and are pinned to the original blade (most other autos); or replace the factory colored insert (S&W Autos). Factory warranty on TRU-DOT sights to the original purchaser for 12 years.
The ultimate marriage of quality and function, Trijicon® self-illuminating tritium inserts provide a fast, easy-to-acquire sight picture in all light conditions. Wedge shaped body has fully rounded edges and sets low in the slide for minimum profile and a smooth, snag-free draw for concealed carry and competition guns. Fine line serrations on rear of blades eliminate glare for the best possible sight picture. Dovetails are cut .002"-.003" oversized to fit existing sight cuts; gunsmith fitting may be required. Straight Eight -One tritium dot on the front sight and one on the rear align vertically for exceptionally fast acquisition.Ultra Low Mount provides an even more compact profile; fits pistols with Novak-type .500"x 65" dovetail in slide. "T" suffix on model number indicates rear sight is .050" taller to provide correct sight picture on smaller short-slide pistols.Ultra Low Mount Ledge- Front edge of the rear sight blade has been cut square to provide adequate purchase for one-handed racking of the slide. Available in standard and T models, with one centered Trijicon insert for "Straight Eight" sight picture or with two side-by-side inserts for a more traditional, three-dot horizontal sight picture.
SPECS: Steel, matte blue finish. Straight Eight - Rear notch is .125" wide. 1911 Auto fits .375” x 65º rear dovetail and .300” x 60º front dovetail. May require milling of slide to install. Instructions included. Kimber and S&W fit factory dovetails. May require minor fitting. Ultra Low Mount, including Ledge, fits Novak-type .500” x 65° dovetail. “T” suffix on model number indicates .050” taller height for short-slide compact pistols. May require minor fitting. 357R may be used with factory front sight.
The 10-8 Performance Glock Night Sight Set combines the heat treated 4140, CNC machined, .140” rear sight along with a green tritium, .215” insert front sight. Both front and rear have 40LPI (Lines per Inch) serrations to provide crisp visual focus and glare reduction, and have a Melonite finish. The sight body is contoured and dehorned for comfortable handling and carry.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
SPECS: Front sight .215” high, .115” wide, Rear U-Notch width .140”
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of manufacture.
Night Fision’s Perfect Dot sights for Canik TP9-series pistols feature design upgrades that make them brighter, more vivid, and more durable than traditional night sights. Like all night sights, Perfect Dots use self-illuminating Tritium to get the "always on" glow that makes them so effective. The difference is PDs have 30% MORE Tritium in them, so they are unusually bright. And the bold front sight draws the eye, encouraging fast, instinctive "Front Sight Focus" to keep your eyes on the target.
The Tritium insert isn’t surrounded by a painted-on ring, but rather one made of a daylight fluorescing material that produces optimum visibility in daylight. The result is what the Night Fision folks call the "Perfect Dot". Provides maximum visibility in both nighttime AND daylight conditions, so when the pressure is on, you’ll locate your Canik TP9’s sights quickly - and get them on target fast.
We are offering Perfect Dot sights to fit TP9SFL / TP9SFX pistols in the factory heights. A separate model fits TP9SA / TP9SF / TP9SF Elite Canik pistols.
Options include a choice of Square or U-shaped rear notch in plain Black (no inserts) or with Tritium dots (Clear) on either side of notch. Front dot options include a choice of Orange or Yellow outline around the Tritium dot. Read the listings below carefully before ordering.
With so many options available, you can fit your Canik TP9 with a "Perfect Dot" night sight configuration that’s... perfect for you.
To meet the shooters’ increasing demand for high quality sights LPA has developed
the spr series. The SPR sight sets are machined from solid steel using state-of-the-art CNC
milling. Improve your firearm with a spr sight set!
• Streamlined design and compact low profile.
• Micrometric adjustment for windage and elevation provided by hardened click screws.
• Tapered dovetail for a strong locking in the existing groove.
• Allen wrench and adjustment screwdriver included in the package.