Buy at this store.See Detail Online And Read Customers Reviews Replacement Bullet Points Cratex prices over the online source See individuals who buy "Replacement Bullet Points Cratex" Make sure the store keep your private information private before you buy Replacement Bullet Points Cratex Make sure you can proceed credit card online to buyReplacement Bullet Points Cratex therefore the store protects your information from fraudulents Make sure the customer support is often there to aid you when you place Replacement Bullet Points Cratex order with them
Bulk replacements sold 25 each per pkg. #8 Bullet Point, 9⁄32" (7.1mm) diameter, 1" (2.5cm) long. #11 Bullet Point, 3⁄8" (9.5mm) diameter, 1" long. #15 Bullet Point, ½" (12.7mm) diameter, 7⁄8" long.
Square Thread Bits cut true 10 tpi, square, barrel threads for '03 Springfields and Enfields. 55° Threading Bits have offset cutter and are the correct bit when threading barrels for 98 Mausers. 60° Threading Bits have cutter offset to left for closest cut possible. All types have clearance cuts.
If you can silver solder or braze your own extension onto a Liner Drill, these standard length, deep hole drills can save you money. Piloted to follow the original bore and have all the same high-grade features as our .22 Liner Drill: Deep hole flute geometry and special helix angle to prevent jamming; reinforced web for accurate hole dimensions; nitrided lands for long life.
SPECS: High speed steel. Pilot diameter/overall length; .22 - .215"/9.5", .25-20 - .248"/11", .32-20 - .302"/11.6".
1911 stock bushings get bunged up or lost in the field or when a pro is doing a "Master Reblue Job" they get removed to permit the finest possible polishing job. Then they have to be replaced and that can be a real chore. No more. With this special Brownells 1911 Auto Grip Bushing Staker, it's now quick and easy to get them tight on the first try. Made in 8 segments with 90° cuts between for maximum bushing contact to frame. Has "handle" and deep hole in top of Staker to prevent your 1/8" punch from slipping off. (The 1/8" punch passes thru bushing center on opposite side of frame to give clean access to bushing being replaced or tightened.) Note: Make an anvil block to support outside of bushing while it is being staked. Works great!
SPECS: Staker head - S5 Tool Steel with Rc 57-60 hardening. 4" (10.2cm) handle.
Brownells "Premium Plus" stones are the very finest we can offer. Industrial grade cobalt is added to uniformly sized aluminum oxide crystals and bonded with special, cool-running adhesives to form the hardest, longest-wearing, fastest-cutting, grinding points available to the trade. Gives a smooth, ready-to-finish surface on all types of ferrous and non-ferrous metals. Stones resist filling and gouging; can be re-ground or re-shaped, lasting much longer than "hobby" grade points. Hardened steel shafts are nickel plated for long life and stay concentric even with repeated use.
We picked our 10 most popular grinding points and put 3 of each into a convenient, easy-to-store Kit and included a very special price for buying all 30 points at one time. Plus, the economical Refill 6-Paks make it easy to keep your Kit well stocked.
SPECS: Shank - 1½" (3.8cm) long, 1/8" (3.2mm) diameter.
Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels..
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes one ½" square bar, 5" long with offset end pocket for cutting ID and OD threads; plus, two high-speed steel inserts, TNMC-32NV and TPMC-32NV.
SPECS: Bar - .500" shank, 5.0" OAL, with end pocket offset for ID and OD threads, 1.375" minimum bore diameter, 60°. Inserts - .375 IC, .125 thick, .150 hole. T-15 HSS, one TNMC-32NV and one TPMC-32NV. Includes two 6-32 FH screws and 5⁄64" hex wrench.
Universal Sight Base Cutter made for sights with 60° shoulder and a 3⁄8" base. Cuts most standard front and rear rifle sights as well as 1911 Auto low-mount, adjustable sights like E.E.A. Super Sights, Millett and current Bo-Mar. Cutter is slightly undersized at .359" which requires that you make two cutting passes to compensate for factory variations in sight manufacture and milling tolerances. Designed with proper relief for maximum strength and clean cutting. CAUTION: For use in milling machine only. Solid carbide. 2" (5cm) long. 3⁄8" (9.5mm) diameter shank. 60° shoulder.