Other gas blocks are tunable, but the Adjustable Gas Block from ODIN Works is truly adjustable and packed with features. Machined from steel and black nitrided for durability. Front facing Inconel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the Inconel screw where you want it and you’re done. Will fit any barrel with .750 diameter and works with any caliber.
Not for use with pistol length gas sytems.
Made from stainless steel, the gas tubes include the installation roll pin. Available in pistol, carbine, mid-length, and rifle lengths.
Replaces the factory front sight/gas block and allows you to tune the gas system for smoother cycling and operation. Especially critical on match and varmint rifles when shooting both factory and custom-loaded ammunition. Simple setscrew lets you control the gas flow, so you can customize the setting for each load. Hex head setscrews clamp the block securely to the barrel. Installation instructions included. Standard model features a topside Picatinny rail for mounting flip-up front sights and other accessories. Available in lightweight aluminum or stainless steel for additional muzzle weight. Fits barrels with .750" O.D. at gas block. Heavy - Aluminum, with rail, fits heavy barrels with .936" O.D. Low Profile model fits under handguard on .750" barrels. Rugged, all-steel construction resists gas erosion and helps maintain rifle’s weight distribution. Heavy Low Profile aluminum block fits under handguard on barrels with .936" O.D. Eight Torx T15 screws securely clamp the block to the barrel. A2-Style – Retains the classic look of military rifles and carb ines. Two side-mount hex head screws clamp the block securely to barrels with .750" O.D. at the gas block position. Rugged, stainless steel construction resists gas erosion and helps maintain rifle’s weight distribution. Hard, abrasion-resistant black oxide finish. JPGS-5B and JPGS-5S Low-Profile models have a slimmer profile to reduce weight and to fit under a wider variety of handguards. JPGSA is an adapter designed to allow use of a .936 gas block with a .875 barrel.
SPECS: Standard - Available in 6061 T6 aluminum, hardcoat anodized, matte black, or 416 stainless steel, natural silver or black oxide finish. 17⁄8" (4.7cm) long, .950" (2.4cm) wide. .750" (19mm) I.D. Heavy - Aluminum, hard anodized, matte black. 17⁄8" long, 1¼" (3.2cm) wide. .936" (23.7mm) I.D. Low Profile - Carbon steel, matte black. 17⁄8" long, 1" (2.5cm) wide. .750" I.D. Heavy Low Profile - Aluminum, hardcoat anodized, matte black. 17⁄8" (4.7cm) long, 17⁄16" (3.6cm) wide. .936" I.D. 2.6 oz. (74g) weight. Minimum 1.750" handguard I.D. recommended for proper clearance. A2-Style - 416 stainless steel, matte black oxide finish. 17⁄8" long, 7⁄8" (2.2cm) wide, 33⁄8" (8.6cm) high, .750” I.D.
The SLR Rifleworks Sentry Adjustable Clamp On Gas Block gives AR owners total control over their rifle's gas systems, giving them the chance to fine-tune the gun with different ammo or with an attached suppressor.
The SLR Rifleworks Sentry Adjustable Clamp On Gas Block doesn't operate with any small screws or balls like other gas blocks, removing the chance these parts could fail or get lost.
The SLR Rifleworks Sentry Adjustable Clamp On Gas Block is adjustable with an included tool and features a clamp-on attachment design that is guaranteed to provide a solid gas seal.
The SLR Rifleworks Sentry Adjustable Set-Screw Gas Block ensures that AR-15 shooters have the ability to fine-tune their gas system for optimum operation.
The SLR Rifleworks Sentry Adjustable Set-Screw Gas Block is constructed with a simple metering system that doesn't use springs or balls and is adjustable through the use of an included tool.
The SLR Rifleworks Sentry Adjustable Set-Screw Gas Block is equipped with two set screws that lock the block into the barrel for an ideal gas seal.
The Superlative Arms patented “Bleed Off”, Gas Piston System for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks.
NOT RATED FOR 300 BLACKOUT IN PISTOL LENGTH
Stainless steel gas tubes are salt bath nitrocarburized for extra resistance to heat and corrosion. Nitromet finish gives added durability with a surface hardness of Rc 55. Installs easily and available for carbine and mid-length gas systems
Mil Spec 304 stainless steel, matte black Nitromet finish. Carbine- 9/34" (24cm) long. Mid-length-11 3/4" long.
The AK platform, though renowned for its reliability and durability in battlefield conditions, has a well-known flaw: its gas system is hugely overgassed. Luckily, the market stepped up to provide a solution in the form of the KNS Precision AK Adjustable Gas Piston.
How do you know if your AK-style rifle needs better gas regulation? Head to the range, fire a few rounds and see how far your brass ejects. If it's hitting the ground more than 15 feet away, then you need the KNS Precision AK Adjustable Gas Piston. This setup helps to reduce wear on the gun, providing for a longer operating life.
Each KNS Precision AK Adjustable Gas Piston can be installed without the use of a gunsmith in the space of 10 minutes, ensuring you can get back onto the range with little downtime.