How about Accu/level Articulating Scope Level Flatline Ops, Inc. You can order Accu/level Articulating Scope Level Flatline Ops, Inc. after check, compare the prices and check day for shipping. Some people are are interested to buy Accu/level Articulating Scope Level Flatline Ops, Inc. in the cheap price. While the item could possibly be priced similarly at different shops.
The Accu/Level scope level clamps directly to the scope tube to help you correct “cant error” for a dead-on true vertical hold that improves accuracy. Bright, fluorescent yellow bubble-level pivots out into the open position for immediate use and swings back over the top of the scope for storage. Models available to fit 1", 30mm, and 34mm scope tubes. Accommodates both left- and right-hand shooters. Ring clamp holds tight with two stainless steel Allen head screws. Integral accessory dovetail accepts the Strong Arm Mount for attaching a cosine indicator to your Accu/Level.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. 9⁄16" (1.5cm) long x 2½" (6.3cm) wide (closed), 4" (10.2cm) wide (open).
Streamlined eye-pleasing appearance blends in perfectly with traditional scope rings while helping to eliminate accuray-robbing canting errors. Easy-to-see offset level helps you make immediate corrections without taking your eyes off the target. Attaches to your riflescope like a traditional scope ring; halves clamp together with two steel Allen head screws. Aluminum construction, hardcoat anodized, matte black. Reversible design works for left- and right-hand shooters. Models available for 1" or 30mm diameter scopes.
For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.
Mounts quickly and easily to the riflescope tube.
The Long Range Arms Send It Precision Shooting Level provides precision shooters with the capability to ensure that their rifles are completely level for a range of any situations, whether it's mounting scopes or building the perfect shooting position.
The Long Range Arms Send It Precision Shooting Level uses five different sensitivity settings that allow users to fine-tune the level of precision they need for their rifle setup. The level incorporates a green LED light that indicates when the rifle is level, and the electronic system calculates this point up to five times faster than similar mechanical devices.
The Long Range Arms Send It Precision Shooting Level is calibrated with a 12-point axis system can also be adjusted to match your optic's crosshairs.
The Sinclair Offset Scope Level has a unique offset design that allows the shooter to see the level while still behind the scope. The offset level attaches to the riflescope like a scope ring and can be positioned so the shooter can see it easily. The Sinclair Scope Level helps the shooter avoid loss of accuracy resulting from positioning (canting) the rifle differently each time.
The machined aluminum Sinclair Offset Scope Level is available for 1 inch and 30 mm scope tubes. Available in matte black and satin silver finishes. The Sinclair Offset Scope Level can be mounted for use by right-hand or left-hand shooters.
RIFLESCOPE LO PRO BUBBLEVEL 1-INCH
This slim, low-profile design allows the Bubblevel™ to be mounted on most scopes without removing the scope from the rifle. It is easily visible without losing the sight picture.
Mounts quickly and easily to the riflescope tube. Made in the USA.
Gives an instant check to make sure the gun is perfectly level for every shot, so every shot goes where it's aimed. If you sighted in carefully at 100 yards with the crosshairs level, then canted the gun just six degrees you'd move the next shot over 1/2". Not much, but enough to completely miss a small target, or wound a larger one. The problem gets worse at longer ranges. Clamp the ACD on the scope tube where it's visible to the non-sighting eye.
Compact bubble level instantly displays the amount of tilt or “cant” as you hold your rifle so you can make fast, easy corrections to improve accuracy. Installs on either side of rail/optics to accommodate both left- and right-hand shooters. Folds out-of-the-way when not in use, and a knurled aluminum cover threads over sighting bubble to protect it. Rail Mount clamps to a MIL-STD 1913 Picatinny rail. Protective cover threads onto opposite side for storage when not in use.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Green liquid. Rail Mount - 5⁄8" (1.6cm) long, 3¼" (8.3cm) wide open, 17⁄8" (4.8cm) wide folded, ½" (1.3cm) high.