On sale Universal Sight Mounting Fixture & Components Forster You can order Universal Sight Mounting Fixture & Components Forster after check, compare the prices and check day for shipping. Some people are are interested to buy Universal Sight Mounting Fixture & Components Forster on the cheap price. While the item may be priced similarly at different shops.
The Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and pump guns! You have only to spoil one good gun with a faulty job and you've spent the price of the jig. We have sold a great number of these to gunsmiths during the recent years. The universal comment when we meet scope jig buyers later is "I don't know how I ever did business without it. Would rather almost do without my right arm than lose it now!"
The Forster Universal Sight Mounting Fixture was designed to fill the exacting requirements encountered in drilling and tapping holes for the mounting of scope mounts, receiver sights, shotgun beads, etc. The Fixture will handle virtually all bolt action, lever action and pump action guns including the Savage 99, Remington 760, etc.; in fact, any single barrel gun as long as the barrel can be laid into the "V" blocks of the Fixture. Tubular magazine guns are done in the same manner by first removing the magazine tube.
The Fixture will locate the holes to a standard, predetermined spacing built into the over-arm, or to any other spacing by sliding the over-arm in either direction. "Run out" of the drill is eliminated as it is guided through a hardened and ground drill bushing. Tapping is done through another bushing of the correct tap size, and eliminates cocking of the tap which is a major cause of tap breakage and sloppy holes. The sliding over-arm has three holes with standard spacing of .500" and .860" between centers into which the interchangeable drill and tap guide-bushings fit. The over-arm is keyed and slides in a "T" slot. It is always in true alignment with the exact center of the gun barrel.
The main body of the Fixture is cast aluminum. The two "V" blocks are adjustable for height and made of hardened steel accurately ground on the "V" as well as the shaft. Accuracy in every detail has been the first consideration!
It is truly a precision fixture that will save its cost over and over again while allowing you to do a really first class job on every gun that comes into your shop.
Simple, easy-to-clamp jig aligns the proper drills and taps so you get perfectly-centered, cleanly-threaded scope base holes without all the extra setup time and hassle. Based on the principle of sliding parallels, this jig places locking, hardened drill bushings in one of three different hole spacing patterns. Gives the versatility to drill and tap for almost any scope mount base.
SPECS: Steel & aluminum, black finish. Approximately 5½" (14cm) long, 2¾" (7cm) wide. Fits receivers between .630" and 1.440" in diameter. Includes #31 (6-48) and #28 (8-40) drill and tap bushings.