Where to purchase Sinclair Scope Ring Lapping Kits Sinclair International You can order Sinclair Scope Ring Lapping Kits Sinclair International after check, compare the costs and check day for shipping. Some people are need it Sinclair Scope Ring Lapping Kits Sinclair International in the cheap price. While the item could possibly be priced similarly at different shops.
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind, whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings.
The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment.
Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive amounts of windage and elevation which moves the scope farther from its optical center. The farther you are from the optical center, the more likely you are to have distortion and a darker sight picture.
Sinclair Scope Ring Lapping Tools ( 1 inch, 30mm, 34mm, 35mm) are made from ground accuracy stock stainless steel that has a tolerance of +/-.0005 inch. Each Sinclair Lapping Tool comes with the lapping bars are 10 inch in length, which gives you plenty of stroke length to quickly lap your scope rings.
Professional Retical Leveling System: The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.
The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
Weatherproof, dust-proof, moisture-proof scope covers protect your scope’s lenses from being damaged during tactical and hunting situations. Cover flips open easily with finger pressure to spring up, and out of the way. Eye and Objective covers sold separately. To determine the correct scope cover, measure the diameter of your scope eyepiece or objective and use the chart.
The Accu/Level scope level clamps directly to the scope tube to help you correct “cant error” for a dead-on true vertical hold that improves accuracy. Bright, fluorescent yellow bubble-level pivots out into the open position for immediate use and swings back over the top of the scope for storage. Models available to fit 1", 30mm, and 34mm scope tubes. Accommodates both left- and right-hand shooters. Ring clamp holds tight with two stainless steel Allen head screws. Integral accessory dovetail accepts the Strong Arm Mount for attaching a cosine indicator to your Accu/Level.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. 9⁄16" (1.5cm) long x 2½" (6.3cm) wide (closed), 4" (10.2cm) wide (open).
Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring the crosshairs to the bore. Even a slight cant of the crosshairs can reduce overall accuracy, change point of impact and increase the likelihood of missed "bulls" or wounded game.
Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target shooters, and gunsmiths the convenience of initial sighting-in of scopes and sights at home or in the shop. Easy-to-use: attach collimator to the muzzle, then adjust the windage and elevation of the scope or iron sights until they align with the collimator grid. Sights centered on the grid will shoot very close to point-of-aim at 100 yards. Collimator is CNC-machined from aluminum, then hardcoat anodized to protect the finish from nicks, dings, and surface wear. Includes convenient carrying case that protects from damage and keeps each item clean and ready to use. Standard model features 15 steel arbors that fit bores ranging from .177 to .50 caliber, including popular metric calibers, to provide precise alignment with the collimator for extremely accurate sight adjustment. Roll-up storage case easily fits in your range bag or tool box.
SPECS: Collimator - Aluminum, hardcoat anodized finish, matte black. Standard contains (1) insert of each caliber: .177, .22, .25, .27, 6mm, 6.5mm, 7mm, .30, .32, .338, .35, .375, .44, .45, .50 . Collimator - 4¾" (12cm) long. Inserts - Steel, 3¾" (9.5cm) long. Case - Vinyl, black. 3¼" (8.2cm) diameter x 5½" (14cm) wide, rolled up.
Streamlined eye-pleasing appearance blends in perfectly with traditional scope rings while helping to eliminate accuray-robbing canting errors. Easy-to-see offset level helps you make immediate corrections without taking your eyes off the target. Attaches to your riflescope like a traditional scope ring; halves clamp together with two steel Allen head screws. Aluminum construction, hardcoat anodized, matte black. Reversible design works for left- and right-hand shooters. Models available for 1" or 30mm diameter scopes.
DEFENDER™ FLIP CAP EYEPIECE
Virtually indestructible, these caps will fit snugly on nearly all Vortex Optics and features a snap flat spring that will keep your line of sight unobstructed. Rifle ranges the world over are littered with broken flip caps. This is one cap you will most likely never see in a flip cap boneyard.
The Eyepiece cap has three stop positions. The first vertical, to put your dope disk (optional accessory) literally right in your face. The second at a 45° and the third at 90° to lay flat back. The Eyepiece cap fits all Vortex® Riflescopes except the 1-inch tube Viper® model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC.